ANCEL S300 Lite Automotive Boat Truck Pipe Leak Smoke Detector Machine Tester Diagnostic Tool

Supports multisystem testing, especially EVAP system EVAP System Test Intake System Test Exhaust Systems Test Crankcase system test Car Sealing Test Fuel Tank System Test Turbo System Test Various Pipe Fittings Test 2 kinds of modes AIR modelSmoke mode Air mode First, use the air mode to directly measure the leak, and judge whether there is a leak by the pressure gauge value.  If it is less than 0.5bar, it will inevitably leak.  If it reaches 0.8bar and above, the pipeline tightness is very good. Then there is no need to waste baby oil. SMOKE MODEAfter the air mode determines that there is a leak, use the smoke mode to find the leak. Wide Range of Applications Free to choose AirSmoke method to find leaks How to use Ancel Step1 Fill in 20ml test oil baby oil to the detector Step2 Disconnect the pipe that needs to be connect with the detector Step3 Connect detector with DC12V battery,device starts to work Step4 The pipe will be filled with smoke,check the leak points How to judge leakage through the pressure gauge NO Leak When the value of the pressure gauge remains unchanged and the flow meter will read zero ball at bottom of scale, it means that there is no leakage in the system. Small Leak When the value of the pressure gauge drops and the ball in the flow meter slowly fall to the bottom of the scale, it indicates a small leak in the system. Massive Leak When the value of the pressure gauge reaches zero and the flow meter ball never falls to the bottom of the scale, it indicates a large leak in the system. Overheat Antifrost Protection Overheat Protection When the temperature of the device exceeds 75, power protection will be intelligently activated to turn it off. Antifrost Protection The device can also work normally at 20. Specification Power source12V Fully Charged vehicle battery Current6A Flow rate